Do you repair Wolf ranges in kitchens with Sub-Zero refrigerators?

Yes. Wolf ranges are made by the same company as Sub-Zero, and the two often share a kitchen. We repair both, along with Viking and Thermador appliances.

Why does my range igniter keep clicking?

The usual causes are moisture or food residue around the burner, a burner cap that isn't seated correctly, or a failing spark module or switch. If it keeps clicking after the burner has dried and the cap is properly in place, the range needs a diagnosis.

My oven doesn't match the temperature I set. Can that be fixed?

Usually, yes. Common causes include a failing temperature sensor, a weak bake element or gas igniter, a worn door gasket, or a control board fault. We test each of these to find which one it is.

Can you fix my range in one visit?

Often, yes. Many repairs are finished the same day if the part is on hand. If a model-specific part has to be ordered, we schedule a second visit once it arrives.

Are you affiliated with Viking, Wolf, or Thermador?

No. We are an independent repair company and are not affiliated with or endorsed by any appliance brand. We specialize in premium appliances from Sub-Zero, Viking, Wolf, and Thermador.

Range Repair in Los Angeles, CA | Sub-Zero Appliance

Q: What should I do if I smell gas near my range?

Don't light anything or turn switches on or off. Leave the house and call your gas utility or 911 from outside. Once the utility says it's safe, we can repair the range.

The short answer

We repair Viking, Wolf, and Thermador ranges in Los Angeles homes, including the ranges in kitchens built around Sub-Zero refrigeration. Most problems, such as clicking igniters, weak burners, uneven ovens, and control faults, can be diagnosed and often fixed in a single in-home visit.

When a burner won't light or the oven won't hold temperature, cooking at home stops. We repair premium ranges in homes across Los Angeles, from older gas models to newer dual-fuel and induction units. We work mostly in high-end kitchens, often built around a Sub-Zero refrigerator, and we repair ranges from Viking, Wolf, and Thermador. Wolf ranges come from the same company that makes Sub-Zero, so the two often share a kitchen. Our technicians come from North Hollywood, about 10 miles north of the city. We diagnose the problem in your kitchen, explain what we found in plain terms, and fix the range there whenever the part and the job allow it.

Range problems we fix in Los Angeles kitchens

A professional-style range has more parts than a standard stove. It has sealed burners with individual igniters, one or two convection ovens, sometimes a griddle or charbroiler, and an electronic control board that ties it all together. When one of those parts fails, the symptom usually points to a short list of causes. We test each part instead of guessing and replacing parts until something works.

These are the problems we see most often:

Igniters that click constantly or won't stop clicking after the burner lights
Burners that won't light, light unevenly, or produce a yellow or lazy flame
Ovens that run hot or cold, heat slowly, or don't reach the set temperature
Convection fans that are noisy or don't run
Griddle and charbroiler elements that don't heat evenly
Error codes, unresponsive touch controls, or knobs that don't respond
Oven doors that don't seal or close properly, and self-clean cycles that won't start or finish
Oven lights, hinges, and racks that are worn or broken

Gas, dual-fuel, and induction ranges each need different repair work

Many Los Angeles homes, especially older houses and remodeled bungalows, still cook on all-gas ranges. On these, the usual problems are igniters, spark modules, burner valves, and oven safety valves. Burner ports clog with spills and cleaning residue. Igniters wear out over time, and moisture from boil-overs can make them click when they shouldn't.

Dual-fuel ranges pair a gas cooktop with an electric oven. These need both kinds of diagnosis: gas work on top and electrical testing on the bake and broil elements, temperature sensor, and control board below. Induction ranges have no flame. Their faults are usually in the power electronics, cooling fans, or touch controls, so they need careful electrical testing.

Viking, Wolf, and Thermador build each of these types differently, so we look at the model and serial number before deciding on a repair.

What to expect during a range repair visit

We start by asking what you've noticed: when the problem started, whether it happens all the time or only sometimes, and any error codes on the display. Then we test the parts involved. That can mean checking igniter draw, measuring element and sensor resistance, inspecting the flame, or running the oven through a temperature check.

Once we find the cause, we explain it and walk you through your options before doing any work. If we have the part on the truck, we can usually finish the repair during the same visit. If a model-specific part has to be ordered, we tell you so up front and schedule a return visit once it arrives. Before we leave, we test the range so you can see that it works.

Tell us what your appliance is doing.

Call (213) 895-4367 Request Service

When to stop using your range

Some range problems are an inconvenience. Others are a safety issue. If you smell gas, don't try to light a burner or turn switches on or off. Leave the house and call your gas utility or 911 from outside. Once the utility has confirmed the area is safe, we can repair the range itself.

You should also stop using the range and schedule a repair if you see scorch marks around the controls, notice a burning electrical smell, see flames escaping the burner area, or have an oven that keeps heating after you turn it off.

Areas we serve in and around Los Angeles

We drive south from North Hollywood to homes throughout Los Angeles, including ZIP codes 90002, 90003, 90004, 90005, 90006, 90007, 90008, 90010, 90011, and 90012. We also repair ranges in nearby Culver City, Beverly Hills, Santa Monica, West Hollywood, and Inglewood. When you book, tell us your range brand and model and describe the problem. That helps us bring parts that are likely to fit and keeps the visit short.